1.)HD3.2 inch full color screen, the display effect is clear
2.)ID/IC full hand, voice broadcast.
3.)Support read write Frequency: 125KHz, 250KHz, 500KHz, 375KHz,625khz, 750kHz, 875KHz, 1000KHZ, 13.56MHz(ISO1443A), Proxii cards.
4.) Support read:EM4100/EM4200,MF classic 1K,UID cards,Ultralight,Ntag203, 1386/1326
5.)Support cards write: 1386/1326,T5577,EM4305,MF UID cards.
6.)Digital keys input ,numbers can be directly input.
7.)4 pcs AAA batteries power supply, handheld device , easy to carry. Also can use USB cable as power supply.
8.)Comes decoding, direct preparation of various types of smart card access door.
9.)It can crack the encryption mf card.
Remarks: The copier can not copy Master card, Credit card ,bank card, transport card , can not copy the value inside , that is not allow !
How to Crack encryption 13.56Mhz cards:
Please read it carefully and follow the steps as below:
When the 13.56mhz cards have encrypted,it should be using the software to crack the cards.
Step 1:Conneted with copier with computer via USB cable, press the "on/off" button, the copier will be show the "Disclaimer"page,DON’T press any button on the Copier,then your computer will show a removable disk.
Step 2:Open the disk,there is the manual and the software,Press the button "OK" to agree with the Disclaimer on the computer,then argee with the copier's "Disclaimer"page, It will be connect successfully,
Step 3 :Put your original card on the back side of the Read/Write area,then press the button "scan"to crack the passwords,after 2 or 5 minutes,the passwords will be cracked successfully,
Step 4:Put one UID cards in the read/write area, press"write“button,It will show write successfully .